The shuttle-shaped lobes are defined by the shape of the blinds and are usually mounted on a light-picking roof or facade and can be installed indoors or outdoors. According to engineering needs, there are fixed and active two, in which the motor wing blinds in the range of 0-90 degrees at any angle, the design intention is to maintain the ideal indoor light and temperature in every natural conditions, the automatic control system composed of sun-shielding leaves will automatically adjust the blinds according to your needs for shade or light, It helps you get a good life and work environment at any time of the day. Shades can block up to 80% of solar radiation, saving more than 30% of air conditioning and other related shade, lighting equipment caused by energy consumption costs

Features：

     1, the blade is shuttle-shaped, double-arc surface, beautiful shape, with a high-tech sense, the blade cross-section is large and hollow structure, high strength, in line with the external wall blind toughness and ductility requirements, suitable for large-span use, can play the role of protecting the glass curtain wall

    2, the blade is a slight arc, closing time to reduce forward wind pressure, not affected by the wind shade control, the corner of the blade in 0 degrees to 105 degrees adjustable, according to the sun's irradiated angle to adjust the angle of the blade, so as to achieve the best effect of shade dimming;

    3, hidden motor or external motor linkage to promote, structural science, can easily install combination, there is a reliable quality assurance;

    4, can be horizontal or vertical (including fixed) installation, suitable for a variety of modern buildings of large glass curtain wall and glass roof, flat, facade and oblique building indoor and outdoor shade, the structure of the magnificent atmosphere, leaf color can be selected according to the requirements of designers or owners, perfect with architectural decoration.

      Blade specifications are varied: 85mm, 180mm, 210mm, 250mm, 300mm, 450mm, etc., with reinforced ribs, length size as far as possible with the existing window frame position combined to effectively increase the effect of blackout.

   5. Material: aluminum alloy thickness is not less than 1.0mm, surface treatment has spray molding treatment, fluorocarbon treatment, etc. , of which fluorocarbon treatment is the most common and spray thickness of 6U to 1U, chemical composition: magnesium 0.45-0.90%, silicon 0.2-0.6%.

    6. Mechanical properties: the tensile strength is not less than 160Mpa;

   7. Deviation and deformation: angle deviation of 1 degree, plane clearance: not less than 0.26mm, torque (mm/mm width): not greater than 0.026 per meter length