Mini tiller is the new product in order to meet the needs of the masses users, with reference to the lasted machine. The product produced strictly with the the GB/T13875-2004 standard production and the IS09001. The product has specific reasonable structure, superior performance, convenient and flexible, good reliability, long life and other advantages. The tiller can works in plains, hills, mountains for rotary tillage fertilizing farmland homework, but not suitable for rocky land.
Mini tiller driven by dynamic host and rotary cultivator, supporting power is basic diesel engine, gasoline engine. The user can also match other model diesel engine according to the actual need not greater than the specified value. The machine has simple compact structure, light weight, flexible and convenient operation and reliable, maintenance convenience, good traveling capability.
Scope of applications
This machine can works in Ping-ba, hills, mountains, in upland and paddy fields, tea plantations, orchards, flower and vegetable greenhouses and small land area carries on the demand of the rotary tillage soil preparation and so on, you can choose different matching machine according to the needs of production field operations.
The operation methods:
(a) run-in method
1, Before the break-in method
In order to extend the service life, you should get trial operation before using, be sure to try first to get up to speed. Tighten connection of components, charge sufficient fuel oil, lubricating oil and water, check and adjust the v belt tension. Check the tire pressure and the working condition of the handle.
2, Basic principles:
From low to high speed, load from small to large
3, The purpose of the break-in:
In good technical conditions and the conditions of lubricating oil is as follows, by slowly increasing load, and gradually to the surface of the parts with grinding uneven parts, for the normal use of micro tillage machine and prolong service life.
4, Break-in matters needing attention
(1) First do some braking and steering test, check the operating mechanism is working correctly.
(2) after the break-in, strike hot oil off the bottom of the pan. Cleaning the oil pan and parts in the lubricating oil system, the filter, and then add new oil, add right amount diesel, no load running in low speed a few minutes to wash and remove iron filings grinded down.
(3) check the nut and fasten up all the screws under the cylinder head and other nuts, screws.
(4) check and adjust the valve clearance, a free travel of clutch and brake.
(5) The mini tiller also need the running-in after overhaul, but perform half.
(2) The details of operation:
Check the lubricant before preparation and installation, according to the requirements of the instructions, diesel oil, cooling water and gearbox lubricant.
1, check the tire pressure whether in line with the requirements.
2, check whether the main parts of bolt fastened (focusing on frame, drawing frame and the gearbox housing, driving wheel and other connection parts).
3, the clutch handle in the "off" position, the gear lever in the neutral position, the throttle lever in "start" position, the throttle switch on: "open" position.
4, decompression, machine-cleaned pulled, started in the engine specification of diesel engine.
| 1WG-2.2 | 1WG-3.1 | 1WG-4.0Q | 1WG-4.0 | 1WG-6.3 | 1WG-7.5 |
Modle | 168 | 170 | 171 | 171 | 178 | 188 |
Power(kw) | 3 | 4.2 | 5.4 | 5.4 | 8.6 | 10.2 |
Dimension(mm) | 1300*700*1200 | 1300*700*1200 | 1750*960*1300 | 1450*700*1200 | | 1700*970*1400 |
Weight(kg) | 75 | 75 | 115 | 64 | | 125 |
Structure | direct connection | direct connection | direct connection | direct connection | direct connection | direct connection |
Width(mm) | 700 | 700 | 960 | 970 | 970 | 980 |
Cooling way | Air-Cooled | Air-Cooled | Air-Cooled | Air-Cooled | Air-Cooled | Air-Cooled |
Corollary equipment | Rotary blade*1 | Rotary blade*1 | Rotary blade*1 | Rotary blade*1 | Rotary blade*1 | Rotary blade*1 |