Granulator Cooling Equipment / Pellets Cooling machine
1. Introduction of Granulator Cooling Equipment / Pellets Cooling machine:
Granulator Cooling Equipment / Pellets Cooling machine is mainly used for cooling of
pellet feed in the feed pelleting section. It cools the pellet feed coming from pellet mill and
with a temperature of 70°C-90°Cto a temperature 3°C~5°C slightly higher than ambient
temperature, and is capable of lowering to a safety moisture content. The cooled pellets not
only improve the pellet firmness but also can prevent from going mouldy, that it is good for the transportation and storage of pellet feed.
2. Features of Granulator Cooling Equipment / Pellets Cooling machine:
1) The counter flow cooling principle is adopted to cool the pellets with high temperature and
moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the Same time, The airlock is used for feeding and space of air inlet bigger,therefore it can get better cooling effects.
2) Slide reciprocating discharger has smooth and reliable discharging,low residue.
3) Low pow consumption, easily operation.
4) Pellet temperature after cooling is less than 3-5ºC ambient temperature.
3. Main Technical Parameters of Granulator Cooling Equipment / Pellets Cooling machine:
| Model | SKLB1.5 | SKLB2.5 | SKLB4 | SKLB6 | SKLB8 |
| Volume(m3) | 1.5 | 2.5 | 4.0 | 6.0 | 8.0 |
| Capacity(t/h) | 3 | 5 | 10 | 15 | 20 |
| Cooling time(min) | Less than 10-15Mins |
| Temperature after Cooling(°C) | Not higher than ambient temperature +3~5ºC |
| Aspiration(m3/min.t) | 34 |
| Power(kw) | 0.75 | 1.10 | 1.50 | 1.50 | 1.50 |
| Power of Airlock (kw) | 0.55 | 0.75 | 1.1 | 1.5 | 1.5 |
4. Feed production line Contains machine:
Hammer mill, mixer, pellet machine, cooler, screener and packing machine, etc.
5. Pellet feed of wide source of raw materials:
The poultry and livestock feed produce line is widely used to process feed with different materials such as corn, maize, grass, grains, molasses, and some other raw materials, is suitable for all kinds of the feed factories.
6. The Whole process for producing pellet:
1.The crushing process:
Raw materials into the shredder is broken into customer requirements of size granular, crushed particles passing through the mesh into the crushing chamber and then is discharged from the discharge port. The user can accord to the needs of the particle size selection screen.
2. Mixing, pellet process:
The crushed particles in the mixer is fully stirred and uniformly mixed, enter into the ring die pellet machine to make them pellet.
3. Cooling, sieving process:
Granular semi finished products in the SH series plane revolving grading sieve for grading
and two circular grinding process and the number of particles, powder for cleaning and
grading. Discharging port is the streamline shape design, not the material deposition, to avoid cross contamination.
4. Packaging process:
The packing process includes two parts: one is hosting part, the other one is packing part. The hosting machine will promote pellets from low to the top with its little hoppers, then drop the pellets into Packing Machine, with the automatic sealing system, the pellets can be packed into bags.
JLNE factory is waiting for your early contact!
Contact: Jennifer
Mobile: 0086 13592542350
Web: www.bestpelletmachinery.com
English
