Multi Layer, High Pressure, Low Consumption Wood Pellet Extruding Line--Zouping Xingtai Machinery Co., Ltd.

FOB Price:	US $88,000-218,000 / Set
Min. Order:	1 Set

Min. Order	FOB Price
1 Set	US $88,000-218,000/ Set

Basic Info

Type: Pellet Mill
Processing Technics: Crushing-before-Mixing
Grinding Equipment Type: Roll Crusher
Bulking Machine Type: Twin Screw Bulking Machine
Condition: New
Pellet Size: 1-12mm
Modulator: 1-3 Layers
Bearing Part: SKF
Raw Material Moisture Rates: 20%-25%
Process Section: 5
Trademark: Xingtai
Specification: GB/T19001
HS Code: 84659600

Processing Object: Forage, Straw
Screen Mesh: With Screen Mesh
Pellet Mill Type: Ring Die Pelleter
Expanding Method: Dry Expansion
Applicable Materials Shape: Granular
Application: Animal Feed
Motor: Siemens
Color Painting: as Per Customer Request
Packing Method: Wood Box
Shape Rates: at Least 99%
Transport Package: Wood Pallet Box
Origin: China

Product Description

Animal Feed Production Line

It mainly contains Chipper process, crush process,Drying process pellet process, cooling process, packing process. The finished pellet has good quality and meet the Europe standard.

The diameter of the pellets can be 1mm,2mm,4mm,6mm, the length can be adjusted according to the requirement of the client, for example 4cm,8cm,12cm

1. Crushing process - Hammer mill

Hammer mill is designed to reduce feed material(bean, peanut...etc) into smaller size for the preparation of producing feed pellet. A hammer mill is a steel drum containing a rotating shaft with hammers mounted. The rotor is spinning at a high speed inside the drum, and the material is impacted by the hammer, and shredded into small size 3-5mm. Then it will ready for the next process to get dried and pelletized.

Model	Capacity(t/h)	Power(kw)	Weight(t)	Size(mm)	Hammer pieces
XTF1000	1.5-3	55	2.6	2400*1100	112

2. Drying process - Rotary Dryer(If necessary)

After crushing process, the wood and animal feed material need to be well conditioned on moisture before pelleting. The best moisture content to pelleting is about 14-16%. You can use moisture detector to determine the moisture content before pelleting. XT Dryer, Roller speed is adjustable, precise gear drive, smooth operation, low noise. Optimized design stove, the new structure. Equipped with hot air filtration system of the stove to prevent flames entering into the dryer cylinder.

Model	Internal diameter (mm)	Length (mm)	Gradient	Speed (r/minute)	Power (KW)	Production(t/h)	Input moisture	Out moisture	Inlet moisture
1.2*8	1200	8000	2°	3-8	5.5	1-1.5	20~50 percent	0~20 percent	300~500°C

3. Pelleting process - Feed pellet machine

A pellet mill, also known as a pellet press, is a type of mill or machine press used to create pellets from powdered material.

Ring Die wood pellet machine is the core technology of the pelleting production line. Our pellet mill bearing and motors are all imported from Japan and European with high quality, which make the pellet mill more efficient and durable.

Driving Gear adopts the high precision gear transmission structure. The wear bearing is made from SKF. The motor use the Siemens Brand.

As for the ring die and roller of the wood pellet mill, we apply alloy steel, such as 20 CrMnTi and 40Cr; and stainless steel, such as 4 Cr13 and 3 Cr13.

Model	Main motor power(KW)	Capacity (t/h)	Feeder power(KW)	Ring die diameter(mm)	Pellet size(mm)
XT-420A	90	2-5	2.2	420	6-12

4. Cooling process - Pellet cooling machine

After the pelleting process, the temperature of the feed pellet is about 60-80 degrees Celsius, and the moisture content of the feed pellets is about 15%. A cooler should be employed to reduce the moisture content to about 3%-4%.

Model	XTCL 1.5
Output(t/h)	1-1.5tons
Moisture reducing	≥3%
Cooling time	15 minutes
Cooling temperature	3-5celsiu
Power	2.2

5. Packing process - Pellet packing machine

After cooling process, the wood pellets will not directly enter into the feeding process, avoiding the wood pellet affected with damp, the packing process is very necessary. The packing process is effectively handled by our Semi-Auto Packing Machine.

Animal Feed Pellet Plant Payment term:
1. Loading quantity: : The above machines requires 2*40' container.
2. Delivery time: within 30 days after receiving deposit.
3. Period of validity of the price: in 3 months.
4. Payment Terms : 30% by T/T as deposit, the balance against the copy of B/L.

Multi Layer, High Pressure, Low Consumption Wood Pellet Extruding Line

Multi Layer, High Pressure, Low Consumption Wood Pellet Extruding Line

Product Categories

Manufacturer Video

Contact Us

Hot Product