The traditional method of disposal of waste plastics is landfill or combustion, this way of dealing with waste plastics is very unscientific. In the destruction of plastic waste, this approach will once again cause serious pollution to our environment. DoingGroup for waste plastics difficult to deal with this social problem, the first to develop a waste tire to oil pyrolysis plant.

The working principle of the waste tire to oil pyrolysis plant is to decompose the waste tire into fuel oil, carbon black, steel wire and combustible gas by using the pyrolysis principle. Specific workflow is as follows:

1. The waste tires into the automatic push device, into the reactor.

2. Through natural gas or heavy oil and other combustibles, heating the reactor, such as temperature reaches a certain level, we can crack the tire, separating the oil and gas and steel wire.

3. Cracked hydrocarbons through the condensing system, liquefied into heavy oil, into the tank. Some are not liquefied will be filtered again through the condensing system.

4. After the dust deodorant device, is the ultimate fuel.

5. The reactor cooled to 40 degrees below, remove the wire and carbon black.

Many success project cases have proved that waste tire to oil pyrolysis plant can not only beautify our living environment, but also bring huge profits to us. Because scrap tires can be turned into fuel oil (about 45-50%), carbon black (30-35%), steel wire (15-20%) and some combustible gases by using a cracker. These regenerants can be used in all aspects of life:

Fuel oil usage

1. Fuel oil: Can be used in steel mills, boiler heating, heavy oil generators, cement plants.

2. Carbon black: can be used for pressure ball burning and refining flour, refined flour and can be used for new tires, rubber soles, pigment manufacturing materials.

3. Steel wire: mainly used for scrap recycling and re-casting.

4. Combustible gas: Equipment will be recycled again, for reactor heating.

So our waste tire to oil pyrolysis plant and other home pyrolysis plant, what are the outstanding advantages? Details as follows:

1. Reactor steel using Q245R steel, 16mm after the boiler plate for steel. The advantage of this plate is able to withstand high temperature, high pressure.

2. For the welding process we strive to be perfect, using a high standard 3-step welding process, this process is characterized by not easy to crack, long service life.

3. Heating system design has insulation layer, to ensure that the temperature is not easy to lose, save heating energy.

Have you got a better understanding of our waste tire to oil pyrolysis plant?

Contact: Ms Bonnie

Phone: +86-371-5677 1821

Mobile/Wechat/Whatsapp:0086-135-2669-2320

Skype: bonniezhao2

Email: oilmachine@doinggroup.com

http://www.recyclingpyrolysisplant.com

http://www.doinggroup.com