Product Details

Pyrolysis plant convert plastic to oil

Have you heard of converting waste plastic into oil? That's right, DoingGroup already has a very mature waste plastic pyrolysis plant that heats waste plastics at high temperatures to crack fuel, carbon black and combustible gases.

Perhaps some people do not know too much about the waste plastic pyrolysis plant. The specific operating procedures for the waste plastic pyrolysis plant are as follows:

1. The waste plastic into the reactor by automatic push device.

2. Reactor with fuel heating, reaching a certain temperature, waste plastics began to crack into oil and gas.

3. These oil and gas will enter the condensing system, a part of which will be liquefied and flow into the oil tank. The other part will be liquefied through the condensing system to liquefy into heavy oil and flow into the tank.

4. The resulting heavy oil will be filtered through the dedusting and deodorizing device. Remove fumes, dust particles generated during combustion of the fuel.

5. Wait until the temperature in the kettle drops below 40 ° C and remove the carbon black from the kettle.



Know the working principle of waste plastic pyrolysis plant, equipment may be more interested in the proceeds. After our engineers accurately test and run our equipment can get nearly one million yuan a day's revenue, these benefits mainly come from the equipment cracked the fuel and carbon black. They have a wide range of uses in life, as follows:



Fuel oil usage

1. Fuel oil: Mainly used in steel plants, boiler heating, heavy oil generators, cement plants.



Carbon black usage

2. Carbon black: mainly used for pressure ball burning and refined milling. Which refined flour and can be used for new tires, rubber soles, pigment manufacturing materials.









So what are the unique advantages of our equipment? Specifically the following points:

1.16mm, Q245R thick steel boiler plate, curved pressure head, can withstand high temperature and high pressure.

2. Unique 3-step welding process, longer service life.

3. Currently the most commonly used and best performing condenser in the oil industry. The cooling system of the equipment is divided into three stages to ensure that the cracked oil and gas is fully cooled and the oil yield is increased.

4. A water separator, water seal, vacuum devices and other safety devices. Can purify oil and gas, exhaust, to prevent its back. And can provide negative pressure, drainage of oil and gas.




Through the above introduction, you have a further understanding of our waste plastics pyrolysis plant?







Contact: Ms Bonnie

Phone: +86-371-5677 1821

Mobile/Wechat/Whatsapp:0086-135-2669-2320

Skype: bonniezhao2

Email: oilmachine@doinggroup.com

http://www.recyclingpyrolysisplant.com

http://www.doinggroup.com