Product Details

Neutral Cure One Component Sealant Silicone Silicone Adhesive Sealant

Product Description



Technical Data





	Items			Standard	Results
1	Density,g/cm³			specified value ±0.1	0.04
2	Sag,mm		vertical	≤3	0
			level	No deformation	No deformation
3	Tack free time,h			≤3	0.7
4	Extrudability,ml/min			≥80	181
5	Elastic recovery rate,%			≥80	82
6	Tensile modulus MPa	23℃		≥0.4 and ≥0.6	0.7
		-20℃			/
7	stretching tensile adhesion			no damaging	no damaging
8	After ultraviolet radiation			no damaging	no damaging
9	After hot and cold  pressure tensile adhesion			no damaging	no damaging
10	After soaking			no damaging	no damaging
11	Mass loss rate,%			≤10	9




Product Details



Product Uses



















Application:

All kinds of doors and windows installed caulk seal,various indoor decoration caulk seal.

Features:

One-component room temperature curing neutral,easy to use.In the temperature range 4-40℃’s has good extrusion and thixotropy. For most materials have good adhesive properties.Excellent weather resistance and high temperature performance,is the ideal weather sea

Directions:

Must use a solvent such as toluene or acetone,at the interface clean and keep dry.Construction of application of sealant to completely fill the joints to ensure that both sides of bonding.They needs to protect the side labeled tape,but not touch the tape will be the construction surface.The plastic is not cured prior to trimming immediately in order to achieve a beautiful look.

Cautions: